How Do I Clean Black Mold in Shower Silicone? -

How To Clean Black Mold In Your Shower Silicone

Written by

Jason Carter

How To Clean Black Mold In Your Shower Silicone


Nobody likes to go to the bathroom to have a nice shower only to spot black molds in the shower silicone.


Black molds grow in your shower due to water and moisture. They also thrive in warm and humid conditions, making the bathroom an ideal breeding spot.

So how do you clean black mold in shower silicone?

Don’t worry. We’ve got you.

We will go over everything you need to know you get your shower sparkling again and ways to prevent new growths.


How Do I Clean Black Mold In Shower Silicone

The most eco-friendly and safest way to remove black mold from your shower silicone is by cleaning it with distilled white vinegar. For tougher stains, you should mix vinegar with baking soda to remove the mold. You can spray the vinegar on the surface and then use a towel to clean the molds.

Black Mold In Shower Silicone

What Is a Black Mold?

Get this:

Molds are microfungi that reproduce through tiny spores, and these spores form in the atmosphere and fall onto surfaces.

When these molds fall on your bathroom silicone, the moist and humid condition gives them a perfect breeding ground to grow.


The black molds that grow in the shower silicone are not very harsh and can be cleaned easily.


Let us take a look at ways to clean these molds. Additionally, we will also go over preventive measures and how often you should clean your shower silicone.

How to Clean Black Molds In Your Shower Silicone


Your shower silicone is a waterproof rubbery material that fills the space between your shower floor and the wall. It usually requires gentle cleaning to keep it sparkling clean.


If you begin to notice molds in your shower silicone, you must be cautious when cleaning them off to avoid damaging the silicone in the process.


Contrary to popular belief, cleaning experts have advised against using bleach to clean mold since it can also spoil the silicone.

Before you begin:

You should have the following tools available to get the job done

  • Distilled white vinegar
  • Spray bottle
  • Towel
  • Rubber gloves
  • Face mask
  • Toilet paper or an old toothbrush

What is the main cleaning agent?

Distilled white vinegar!

Vinegar is a liquid chemical that contains acetic acid that is strong enough to clean up molds without any harmful effects.

You can follow these easy steps to clean black molds in your shower silicone.

  • Step 1: Put on the rubber gloves and face mask.
  • Step 2: Wipe the shower silicone with a towel and make sure it is dry.
  • Step 3: Twist the toilet paper like a twisted towel.
  • Step 4: Spray the toilet paper with the distilled white vinegar.
  • Step 5: Leave it to sit for a few hours.
  • Step 6: Remove the twisted paper towels.
  • Step 7: Wipe it off with a towel.


You can spray the shower silicone directly with the distilled white vinegar and wipe it off with a towel after a few hours.

Well done!


You can use a toothbrush to clean molds in crevices. Simply spray the affected areas with vinegar and use the toothbrush to scrub them off gently.


It is not advisable for you to use bleach for this process since it causes discoloration and could wear the shower silicone over time.

How to Get Rid of Stubborn Black Molds


Cleaning black molds off your shower silicone is easy and does not require any special effort.


Some molds could be difficult to wipe off, and simply cleaning them with vinegar alone might not get the job done.

You don’t have to worry; we have the perfect solution for you!

Before you start cleaning:

It would help if you put together the following tools

  • A bowl
  • A plastic wrap
  • An old toothbrush
  • A towel
  • A facemask
  • Hand gloves
  • Vinegar
  • Baking soda


Let’s get to cleaning with the help of these simple steps:

  • Step 1: Put on the hand gloves and facemask.
  • Step 2: Wipe the silicone with a towel and make sure it’s dry.
  • Step 3: Mix the two cups of vinegar and one cup of baking soda in the bowl to make a paste.
  • Step 4: Use a toothbrush to spread the paste along the silicone. Make sure to use a generous amount.
  • Step 5: Put the plastic wrap over the paste to prevent it from drying.
  • Step 6: Remove the plastic wrap after a few hours.
  • Step 7: Wipe clean with a towel.

Pro Tip:

You can spray the plastic wrap with vinegar while waiting. It will saturate the paste underneath it so it won’t dry out.

How to Prevent Molds in the Shower Silicone

Get this:

It is important that you prevent mold growth in your shower silicone because exposure to mold can cause health problems like sneezing, wheezing, itching, fatigue, and other allergic reactions.

Long-term exposure can contribute to depression, anxiety, and insomnia, experts say.

Molds also contribute to plumbing issues that can cost you a lot of money to fix!


You can prevent mold in your shower silicone by:

  • Using a dehumidifier in your shower. This will help lower the moisture and humidity in your shower.
  • Using a towel to wipe down the silicone after bathing. You can also install an exhaust fan and run it for 10 to 15 minutes after bathing.
  • Washing bath towels and shower curtains often.
  • Ensuring your silicone contains a biocide to prevent molds from growing.
  • Spraying your shower silicone with vinegar or an anti-mold shower spray.


It is recommended that you clean your shower regularly with an anti-mold cleaner or vinegar. After each shower, wipe the silicone with a towel and make sure that it gets as dry as possible.


To sum up:

Mold spores form in the atmosphere and thrive on moist or humid surfaces; therefore, your shower silicone will attract molds because it contains moisture or water.


You can remove these black molds by cleaning the shower silicone with vinegar. For more stubborn stains, mix vinegar with baking soda to form a paste.


You should always use hand gloves and a facemask before you start cleaning because molds can cause serious health issues like fatigue, headaches, and itching.

The best part:

You can prevent molds in your shower silicone by:

  • Making sure your shower stays dry often.
  • Using silicones that contain biocide.
  • Spraying your shower silicone regularly with vinegar.


We would love to know if you found these tips helpful. You can also leave your questions and suggestions in the comment section below.

Frequently Asked Questions

Why Is the Silicone in My Shower Turning Black?

Black mold is the most common cause of your shower turning black. Black molds are attracted to wet and humid surfaces, such as a shower silicone. As these molds accumulate, the silicone begins to turn black.

How Do You Get Mold Off Silicone?

You can easily remove mold from your shower silicon by spraying the affected areas with distilled white vinegar and wiping it off with a damp towel after a few hours. You should also ensure that you air your shower to make sure that it stays as dry as possible.

What Is the Black Stuff on Silicone?

The black spots on the shower silicone are most likely black molds. It is important that you clean these molds as soon as they start to grow to prevent them from getting out of control.

How Do You Get Rid of Stubborn Black Mold in the Shower?

You should mix one cup of baking soda with two cups of vinegar to form a paste, spread the paste all over the mold, and then wait for a few hours. Furthermore, use a damp towel to clean the molds and rinse with water. You can also use a toothbrush to scrub crevices.

Leave a Comment